Replacing fuses

1. If the PHS or Sandblaster does not turn on check the fuses. You will find all the fuses within Service access to fuses plate.
2. Turn off the PHS and check the main fuse: PHS 110 V – unscrew the 16A fuse. Check if the fuse is blown. If so, replace it with a new one. PHS 230 V – Check if the residual-current device (RCD) is switched off. If so, switch it on.
3. Turn on the PHS and check if it works. If not, turn off the machine and unscrew the Service access to Fuses panel.
4. Check if the low voltage fuse (6.3A) is not blown. If so, replace it with a new one.
5. Turn on the PHS and check if it works. If the PHS is working and Sandblaster is not, turn off the machine.
6. Check the Sandblaster fuses. If the Sandblaster fuses (0.5A) are blown, replace them.
7. Turn on the PHS and check if it works.
8. If there is still a problem, contact our support team: support@sinterit.salamanders.pl.
9. Dispose of the used fuse according to your local waste management policy.