PHS

Easy and fast material change

Finegrain polyamides used in SLS 3D printing are morphologically distinct from each other – and give different mechanical parameters after sintering.

The more significant the difference, the deeper PHS cleaning is required.

The station is designed so all key spaces are easily reachable – with vacuum and other accessories full deep cleaning takes up to 30 mins!

Multi-material

MultiPHS has 6 settings programmed for working with multiple materials.

This covers the most common types of SLS powder, not only from Sinterits palette but also 3rd party materials.

This allows for maximum versatility and opens up a whole spectrum of possible applications.

Compatibility with all SLS printers

The workstation can be used with all Sinterits printers, but also with any compact or industrial SLS device available on the market

However we recommend using a complete Sinterits solution, we also understand that our customers may have more diverse machine park to fulfill their specific needs.

To answer these needs we made sure our workstation can fit right in with any professional 3D printing setting.

Efficient powder recovery – up to 95%

The MultiPHS collects all unsintered powder in the 20l container.

You can reuse this powder in your next print. Simply add the fresh powder to the powder chamber and the PHS does the rest, setting you up with a refreshed powder mix for your next print run.

If you want to refresh more rarely used material you can also use the solo-sifting cycle – no need to put the powder through the whole system.

Advanced powder managing system

MultiPHS works in sync with all other components of Sinterits solution: printer, ATEX vacuum, and sandblaster, to give the user maximum control over material usage.

The workstation also features an advanced powder recovery system for optimal material recovery, enabling cost reduction through reuse.

Intuitive interface

The improved panel allows users to choose between 5 different sifting programs dedicated to morphologically different materials. Added powder sensors detect an overload or full depowdering and shorten the cleaning process.

The panel also controls connected peripherals like vacuum and sandblaster.

Adjustable workspace

The grid in the depowdering chamber can be lowered and adapted for large print cakes from NILS and other industrial-grade printers. Changing the setting from one system to another only takes a couple of minutes.

The set includes accessories compatible with compact and industrial series. Tools holder is attached with strong magnets and can be moved easily.

Antidust cover

Plexiglass cover minimizes powder spreading, without compromising work comfort. Protects the user from inhaling the powder from the air, which is in line with even the most strict safety requirements.

CONTACT SALES

FAQ

What does the workflow of Multi PHS look like?

Start by removing the cake with the IO box so it can be smoothly moved from the printer area and put on the Multi PHS to depowder the prints. After removing the unsintered powder from the print, turn on the Multi PHS to begin collecting the powder. The sifting and refreshing process take place in the Multi PHS. You only need to fill in the powder chamber with the refresh powder; Multi PHS will mix it for you. After refreshing, move the container with refreshed powder out to reuse it for the next print.

How messy is the overall post-processing?

Contact with the powder was limited at each stage of the process.

The IO Box (added to the printer) helps move the print cake out carefully and slowly, limiting the powder mess. Once you have a print cake on the Multi PHS space cleaning the print, the unsintered powder goes down so you don’t have to move the powder to another place.

The suction hose and powder wiper (attached to the Multi PHS) help you clean up after the depowering stage.

To limit the spread of powder, use the funnel when adding fresh powder from the container to sifted, unsintered material. The funnel is available in our Dedicated Powder Tools set.

What are the differences between PHS and Multi PHS?

There are several new features added to Multi PHS:

Plexiglass cover to minimize the spread of dust.
Movable tool holder.
Adjustable workspace compatible with printouts from LisaX, NILS480, and 3rd party SLS printers.
5 sifting programs for morphologically different materials.
Ability to separate the sieve for solo-sifting.
Overall improvements in UX/UI and workstation construction.

How is solo sifting useful?

You can unplug the sieve from the Multi PHS, slide it outside on the guides and use as a separate sifting unit. It’s a useful feature if you print from rarely used material, and don’t want to clean the whole workstation just for it. You can clean the printout separately (eg. on folding tray) and then sieve the remaining powder for further use.

Why should I purchase Multi PHS? Do I need the workstation for SLS post-processing?

No, you can post-process printouts without the workstation. Your decision to purchase depends primarily on your specific printing requirements.If you plan on printing a large number of parts or using multiple types of SLS powders during the printer’s lifetime, it’s advisable to consider purchasing the Multi PHS. It saves your time, effort, material, and consequently, money.

How much unsintered powder is recovered?

Up to 98%, on average it can be closer to 95%.

How long does it take to clean the Multi PHS and use different powder?

Cleaning time can range from 10 to 30 minutes, depending on the used material.

Is it safe?

Yes, the use of Multi PHS is completely safe. The main risk factors like vapors, airborne dust, ignition, and explosion are thoroughly tested to ensure they are contained within safety guidelines. In addition, Multi PHS is ATEX attested as a part of the Performance set.

Philippe Bendel

Additive Manufacturing Development Leader – Somfy

The main reason Somfy reached out for the SLS technology from Sinterit was productivity. Printing many pieces in one batch was a game-changer

SEE CASE STUDY

Alec Bialek

Head of Jetson’s R&D

When we look at Lisa’s line of printers, or Sinterit at general compared to other companies, the two major things that we liked were the materials, that are open source, so we are not locked into one brand […]. We are able to look around the market and use a material that works best for the part.

SEE CASE STUDY

Rigo Herold

Professor Dr.-Ing., Zwickau University in Germany

It was the best choice for me to fulfill all requirements: possibility to print complex structures, price, speed, reliability.

Maurice Briggs

Director at Lazerthrust

Sinterit LISA is the most accessible means to produce precise constraint-free solutions to modern problems. The technology does what it says on the tin and the team at Sinterit is dedicated to working with their customers to achieve their objectives.

Peter Benthues

H. Gautzsch Firmengruppe

For a company at the beginning of an investigation, support from, and discussion with the technology experts is extremely beneficial. The LISA is one of the few economically feasible solutions in the first stages of any AM Strategy. At lower volumes, it is a perfect solution.

SEE CASE STUDY

Lluís Llenas

Regner

The FFF and SLA parts are a good choice to get a physical impression of the designs and to assemble rough prototypes. But when it comes to producing reliable prototypes to be verified in our fatigue tests or to send functional samples to our customers for validation, SLS is the only acceptable choice.

SEE CASE STUDY

Walter Pucheanu

R&D Technician
Department of Chemical and Biological Engineering (CBI) / University of Erlangen–Nuremberg

The print quality of the Lisa PRO is impressive.

SEE CASE STUDY

Sean Higgins

Nabson Inc.

In order to keep up with our production demand, we have been operating the Lisa PRO almost 7 days a week for the past couple of months, without incident, and produced over 1500 sleeves.

SEE CASE STUDY

Select topic

First name*

Last name

E-mail*

Phone number

Company name

Job title (optional)

Country

State

Upload o file

Your message*

Sinterit sp. z o.o. is the controller of your personal data.
Providing your data is voluntary, but your refusal to provide us with data marked as mandatory (*) will make us unable to communicate with you via our contact form.

You have the right to request from the Company access to and rectification or erasure of your personal data or restriction of processing concerning your personal data and to object to processing as well as the right to data portability. You have the right to withdraw your consent for processing of your personal data at any time, without affecting the lawfulness of processing based on consent before its withdrawal.

To read all our Privacy Policy please click here

(Optional) I want to subscribe to the Sinterit newsletter
If you subscribe to our newsletter we may process your data (both in and outside EU) to send you informational or marketing content. Providing your data is voluntary, but your refusal will make us unable to send you our newsletter.

(Optional) I agree for my data to be shared with Sinterit distributors and resellers (both in and outside EU) so they can contact me with their offers as well as send me their content.
If you agree for your data to be shared with our distributors or resellers they may also become controllers of your data. They may process your data (both in and outside EU) to contact you with their offers and to send you their informational or marketing content. Providing your data is voluntary, but your refusal will make us unable to share your data with our distributors and resellers and to contact them with you.

Pricing

Below there are approximate costs for some example models.

Be aware that the quotation assumes that there is only one piece printed. In SLS technology, the cost per part will be much lower with a higher number of elements printed at once.

Flexible
Standard

Model

Dimensions

PA12
Smooth

PA11
Onyx

Flexa
Grey

Flexa
Bright

Flexa
Soft

TPE

Below

Model volume:

Total print height:

6.82 cm

Dimensions:

65 x 65 x 63 mm

51,30 €

Crank

Model volume:

28.12 cm^3

Total print height:

6.82 cm

Dimensions:

65 x 65 x 63 mm

49,90 €

Derailleur

Model volume:

28.12 cm^3

Total print height:

6.82 cm

Dimensions:

65 x 65 x 63 mm

71,80 €

Driller housing

Model volume:

28.12 cm^3

Total print height:

6.82 cm

Dimensions:

65 x 65 x 63 mm

157 €

Model

Dimensions

PA12
Smooth

PA11
Onyx

Flexa
Grey

Flexa
Bright

Flexa
Soft

TPE

Crank

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

51,30 €

Crank

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

51,30 €

Crank

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

51,30 €

Crank

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

51,30 €

Crank

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

51,30 €

Crank

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

Model volume:

28.12 cm^3

51,30 €

Multi-function Powder Handling Station

Multi-functions, Multi-materials, Multi-printers. ONE central device.

Why having a multi-purpose workstation is important?

What benefits will a Multi PHS bring to your business?

Easy and fast material change

Multi-material

Compatibility with all SLS printers

Efficient powder recovery – up to 95%

Need more details about Powder Handling Station?

Specification

Full specification (PDF)

What is included?

FAQ

What does the workflow of Multi PHS look like?

How messy is the overall post-processing?

What are the differences between PHS and Multi PHS?

How is solo sifting useful?

Why should I purchase Multi PHS? Do I need the workstation for SLS post-processing?

How much unsintered powder is recovered?

How long does it take to clean the Multi PHS and use different powder?

Is it safe?

Philippe Bendel

Additive Manufacturing Development Leader – Somfy

Alec Bialek

Head of Jetson’s R&D

Rigo Herold

Professor Dr.-Ing., Zwickau University in Germany

Maurice Briggs

Director at Lazerthrust

Peter Benthues

H. Gautzsch Firmengruppe

Lluís Llenas

Regner

Walter Pucheanu

R&D Technician Department of Chemical and Biological Engineering (CBI) / University of Erlangen–Nuremberg

Sean Higgins

Nabson Inc.

More tools for post-processing?

Learn more about Dedicated Powder Tools

The must-have equipment for printing and post-processing. All the elements are compatible with the Sinterit ecosystem.

Need a consultation?

Make SLS 3D printing even more cost-efficient

Download our latest ebook on How to reduce SLS 3D printing costs. Get useful tips on how to optimize cost per part.

Any further questions? Contact us.

If you prefer contacting local distibutor, find yours

Need more information? Contact us

Knowledge

Printers

Solutions

Materials

Contact support

Peripherals

Software

Resources

Pricing

Get a free sample box

Multi-functions, Multi-materials, Multi-printers.
ONE central device.

R&D Technician
Department of Chemical and Biological Engineering (CBI) / University of Erlangen–Nuremberg

The must-have equipment for printing and post-processing.

All the elements are compatible with the Sinterit ecosystem.

Download our latest ebook on How to reduce SLS 3D printing costs.

Get useful tips on how to optimize cost per part.